essx carbon?
Moderator: Barto
-
- PV Newbie
- Posts: 9
- Joined: Wed Mar 21, 2007 9:05 pm
essx carbon?
has any body jumped on an essx carbon pole? I am currently jumping 12 feet holding 13 on a regular essx, its a 170, but i only weigh 150. i think i might be blowing through it slightly, i want to move to a longer pole thanks
- vaulter870
- PV Great
- Posts: 905
- Joined: Tue Aug 03, 2004 2:00 pm
- Expertise: Current Club Cocah, Current College Vaulter, PV Addict!
- Favorite Vaulter: Toby Stevenson
- Location: Ft.worth , TX and anywhere there is jumping
- Contact:
yes i have in fact i have quite the series of essx carbons from 14' to 15'9'' poles. they are lighter but react the same way and they are an all around great pole. go to the essx website http://www.xlogicsports.com and get the contact info for bruce and talk to him about what kind of pole that you would need
If you cant do it right , do if 10000 more times till you can
-
- PV Newbie
- Posts: 9
- Joined: Wed Mar 21, 2007 9:05 pm
- BethelPV
- PV Follower
- Posts: 518
- Joined: Thu Jul 22, 2004 4:02 pm
- Expertise: Former College Vaulter, Post Collegiate Vaulter, High School Coach
- Favorite Vaulter: Billy Olson
- Location: ADTF Academy
Ive jumped on both and I prefer Essx over Pacer, though I jump on Spirits now...
I like essx more because Pacer seems to bend very low where essx seems to bend more in the handle. This allowed me to get more out of the poles, which is why I jump on spirits now, because they just feel the best for me. So if you like jumping on Essx, I would suggest sticking with that brand, because you are getting a differently built pole if you switch to a Pacer Carbon, and you might not like it...
Just the way to look at the gamble in my eyes...
Zachmo
I like essx more because Pacer seems to bend very low where essx seems to bend more in the handle. This allowed me to get more out of the poles, which is why I jump on spirits now, because they just feel the best for me. So if you like jumping on Essx, I would suggest sticking with that brand, because you are getting a differently built pole if you switch to a Pacer Carbon, and you might not like it...
Just the way to look at the gamble in my eyes...
Zachmo
Vault with a purpose... Vault for God!!
- vaulter870
- PV Great
- Posts: 905
- Joined: Tue Aug 03, 2004 2:00 pm
- Expertise: Current Club Cocah, Current College Vaulter, PV Addict!
- Favorite Vaulter: Toby Stevenson
- Location: Ft.worth , TX and anywhere there is jumping
- Contact:
yeah i have had carbon fx's and pacer carbons(the predicessors to the fx's) and both are not quite the same as essx. for me i could never get on a big enough pole for it to give me good pop off the top but with essx i feel that the higher bend is much bettter for the way that i jump
If you cant do it right , do if 10000 more times till you can
- Cooleo111
- PV Pro
- Posts: 341
- Joined: Fri Feb 10, 2006 7:15 pm
- Expertise: HS/College/Post-collegiate vaulter, coach
- Lifetime Best: 4.80
- Location: New Jersey shore
- Contact:
I wouldn't say I have a LOT of experience jumping on either but I have definitely jumped on both. The Pacers have a much lighter carrying weightm but I don't really like the way they bend...it seems very low and it's hard to get timed up with properly. The Essx is heavier, like I said, but I got some good throw off of it and it seems to have a higher bend.
- rainbowgirl28
- I'm in Charge
- Posts: 30435
- Joined: Sat Aug 31, 2002 1:59 pm
- Expertise: Former College Vaulter, I coach and officiate as life allows
- Lifetime Best: 11'6"
- Gender: Female
- World Record Holder?: Renaud Lavillenie
- Favorite Vaulter: Casey Carrigan
- Location: A Temperate Island
- Contact:
-
- PV Newbie
- Posts: 9
- Joined: Wed Mar 21, 2007 9:05 pm
-
- PV Newbie
- Posts: 9
- Joined: Wed Mar 21, 2007 9:05 pm
- vaulter870
- PV Great
- Posts: 905
- Joined: Tue Aug 03, 2004 2:00 pm
- Expertise: Current Club Cocah, Current College Vaulter, PV Addict!
- Favorite Vaulter: Toby Stevenson
- Location: Ft.worth , TX and anywhere there is jumping
- Contact:
Return to “Pole Vault - Equipment”
Who is online
Users browsing this forum: No registered users and 16 guests