I'm not getting into the pit
Moderator: achtungpv
-
- PV Newbie
- Posts: 9
- Joined: Tue May 16, 2006 10:01 pm
- Location: Cincinnati, Ohio
If you can get video of your vault or if you can have someone with a good "eye" watch you when you vault, then check for these two things first. Moving your grip down is not a desired goal. First, make sure that you aren't getting lazy with your plant. Make sure that your arms are fully extended and straight up above your head. Second, make sure you are driving off of the ground (jumping upward) when you take off. It is easy to get into a comfort zone and forget those fundamental things. If you do these two things well, you may find that you can move your grip up and still make the pit!!!
- Maine Vaulter
- PV Wannabe
- Posts: 32
- Joined: Sun Jun 11, 2006 9:52 pm
- Contact:
rodeojoe74 wrote:If you can get video of your vault or if you can have someone with a good "eye" watch you when you vault, then check for these two things first. Moving your grip down is not a desired goal. First, make sure that you aren't getting lazy with your plant. Make sure that your arms are fully extended and straight up above your head. Second, make sure you are driving off of the ground (jumping upward) when you take off. It is easy to get into a comfort zone and forget those fundamental things. If you do these two things well, you may find that you can move your grip up and still make the pit!!!
great points also make sure the poles just not too big
pain is only temporary victory is forever
-
- PV Pro
- Posts: 260
- Joined: Mon Jun 06, 2005 8:40 am
- Location: Ogunquit, ME
- Contact:
- Maine Vaulter
- PV Wannabe
- Posts: 32
- Joined: Sun Jun 11, 2006 9:52 pm
- Contact:
I dont think the pole is to big I moved from a 14' to the 13'7" and I was at the top of both... I moved down a size to get a bigger bend on the smaller pole (it's way more flexible). I'm going to a camp at USM in Maine, off topic : Is anyone else on the forum from maine?
Edit: I just saw that PVgoalie101 is. anyone else?....Im from Waterboro, so I jump for Massabesic
Edit: I just saw that PVgoalie101 is. anyone else?....Im from Waterboro, so I jump for Massabesic
-
- PV Pro
- Posts: 260
- Joined: Mon Jun 06, 2005 8:40 am
- Location: Ogunquit, ME
- Contact:
- Maine Vaulter
- PV Wannabe
- Posts: 32
- Joined: Sun Jun 11, 2006 9:52 pm
- Contact:
- vault3rb0y
- PV Rock Star
- Posts: 2458
- Joined: Wed Apr 26, 2006 6:59 pm
- Expertise: College Coach, Former College Vaulter
- Lifetime Best: 5.14m
- Location: Still Searching
- Contact:
Hey man, you need to realize that a softer pole is in no way better. I would take a pole that bends only 40 degrees than one that bends 90 degrees, because basically its stored energy in the pole. If its really soft, it only means its not going to release as fast with you on the end of it, while a stiffer pole will throw you a lot more at the top. I would deffinitly go back to the 14' pole if you can get into the pit with it. Use the 13'7 to practice your swing in practice.Maine Vaulter wrote:I dont think the pole is to big I moved from a 14' to the 13'7" and I was at the top of both... I moved down a size to get a bigger bend on the smaller pole (it's way more flexible). I'm going to a camp at USM in Maine, off topic : Is anyone else on the forum from maine?
Edit: I just saw that PVgoalie101 is. anyone else?....Im from Waterboro, so I jump for Massabesic
The greater the challenge, the more glorious the triumph
-
- PV Pro
- Posts: 260
- Joined: Mon Jun 06, 2005 8:40 am
- Location: Ogunquit, ME
- Contact:
- Maine Vaulter
- PV Wannabe
- Posts: 32
- Joined: Sun Jun 11, 2006 9:52 pm
- Contact:
- ashcraftpv
- That one guy
- Posts: 1202
- Joined: Thu Sep 12, 2002 1:06 pm
- Expertise: Former College Vaulter (D1), Current High School Coach, 1999 Outdoor Big Ten Champion
- Lifetime Best: 5.25m
- World Record Holder?: Renaud Lavillenie
- Favorite Vaulter: Jason Hinkin
- Location: Gig Harbor, WA
- Contact:
- Maine Vaulter
- PV Wannabe
- Posts: 32
- Joined: Sun Jun 11, 2006 9:52 pm
- Contact:
Return to “Pole Vault - Beginning Technique”
Who is online
Users browsing this forum: No registered users and 6 guests