bending

A forum to discuss pole vault technique as it relates to beginning vaulters. If you have been jumping less than a year, this is the forum for you.

Moderator: achtungpv

Redneck
PV Beginner
Posts: 27
Joined: Sun May 15, 2005 6:08 pm
Location: Maine
Contact:

bending

Unread postby Redneck » Tue Jun 07, 2005 10:41 pm

When you went from straight poleing to bending what was the key thing that just clicked to get you bending? or was it a slow prosses alsow what height were you at?

User avatar
ryansanta
PV Whiz
Posts: 160
Joined: Sat Jun 19, 2004 3:26 pm
Location: Livonia, Michigan
Contact:

Unread postby ryansanta » Tue Jun 07, 2005 10:54 pm

If you are correctly strait poleing (the thing you should worry about) bend comes with moving up the grip height to a point where the pole allows it. From achieving a bend I went from 9'6 to 11'6 in one meet.

User avatar
Bonevt
PV Whiz
Posts: 162
Joined: Sat Oct 16, 2004 11:34 am
Location: Little Silver, NJ/ Boston NEU
Contact:

Unread postby Bonevt » Tue Jun 07, 2005 11:04 pm

If you try and bend the pole your most likley going to end up blocking your botom arm. Thats a pretty bad habit to try and lose.

User avatar
CHC04Vault
PV Follower
Posts: 541
Joined: Thu Feb 17, 2005 7:14 pm
Location: Baltimore, MD
Contact:

Unread postby CHC04Vault » Tue Jun 07, 2005 11:59 pm

The key is just a strong plant, bend is from good form, not strength.
"Good my jump, it will be done" Bubka

User avatar
Tamaqua Vaulter
PV Fan
Posts: 54
Joined: Sun May 29, 2005 10:39 pm
Location: Tamaqua, PA

Unread postby Tamaqua Vaulter » Wed Jun 08, 2005 1:14 am

i ened my frosh season with 9ft (no bend) on a 13'1" 140lbs pole holding very low on it............the 1st day of the next season i said "hell, i want bend" so i grabbed a 12'1" 135 lbs pole at the top and got uber bend.........i couldn't believe it iwas so happy.......so the 1st meet i went from 9ft to 10' 6" ........


your question.........i was daring.......took a chance



don't know if that help you at all if not hope you enjoyed reading it
Don't touch my pole!

*TigerVault*
PV Whiz
Posts: 223
Joined: Sat Feb 05, 2005 7:24 pm
Location: Mckendree College in Lebanon, IL - Hometown: Herrin, IL
Contact:

Unread postby *TigerVault* » Wed Jun 08, 2005 3:06 pm

I dont remember the height i was at when i started bending but i know it started from holding higher on the pole and planting above my head better.
Go Dawgs! Woof! Woof! - SIU Salukis

Redneck
PV Beginner
Posts: 27
Joined: Sun May 15, 2005 6:08 pm
Location: Maine
Contact:

Unread postby Redneck » Wed Jun 08, 2005 11:03 pm

im holding at the top of a 14' pole and useing good form acording to my coach anyone know any good drills or exersises to start bending

User avatar
Tamaqua Vaulter
PV Fan
Posts: 54
Joined: Sun May 29, 2005 10:39 pm
Location: Tamaqua, PA

Unread postby Tamaqua Vaulter » Wed Jun 08, 2005 11:14 pm

Redneck wrote:im holding at the top of a 14' pole and useing good form acording to my coach anyone know any good drills or exersises to start bending



whats your pr from this? and what pole are you using?


i usally put the pole end agasint somthing and just bend it like that....pull down on it......
Don't touch my pole!

Redneck
PV Beginner
Posts: 27
Joined: Sun May 15, 2005 6:08 pm
Location: Maine
Contact:

Unread postby Redneck » Thu Jun 09, 2005 9:55 pm

10' its a ucs

BigStick Club
PV Nerd
Posts: 108
Joined: Wed May 11, 2005 12:54 am
Location: Big Horn, Wyoming.
Contact:

Unread postby BigStick Club » Thu Jun 09, 2005 10:09 pm

i usally put the pole end agasint somthing and just bend it like that....pull down on it......

:dazed: You pull down on it? To bend? How in the world does that help you with your vault?

Sorry, I just can't wrap my mind around how that helps you. I would think it would...well, I know it would screw me over, but maybe for someone who trains differently...who knows?

When doing something like Tamaqua Vaulter does, we always push against the pole and practice having a strong plant... when doing this, the pole should arch away from you.

Does anybody else have comments on this?

fong520
PV Pro
Posts: 428
Joined: Fri Feb 06, 2004 9:51 pm
Location: philly, pa
Contact:

Unread postby fong520 » Thu Jun 09, 2005 10:42 pm

yea.. maybe u need a bigger pole?. i kno we had a 10' pole at this one place i jump at and the only way we can even rock back on it fast engouh is if we take a 1 step approach. i kno all the real short poles, unless the weight of them is liek under 100 are kidna stiff i think?.
also search on the forums for it.. there must be like a zillion kids asking the same questions and the reason no one really answers anyone is becasue its been asked soo many times.. i myslef know nothing but im sure u cna find some real advice?.
i run, therefore im buff.

User avatar
master
PV Lover
Posts: 1336
Joined: Sat Feb 05, 2005 2:03 am
Expertise: Masters Vaulter, Volunteer HS Coach, Former College Vaulter
Lifetime Best: 4.36m
Location: Oregon

Unread postby master » Thu Jun 09, 2005 11:47 pm

Redneck wrote:im holding at the top of a 14' pole and useing good form acording to my coach anyone know any good drills or exersises to start bending

This seems amazing to me. If I understand correctly, you are able to "stiff pole" vault gripping at about 13'9" without bending the pole, and get safely into the pit. How much do you weigh and what is the weight rating of the pole you are using? How tall are you?

It would seem to me that if you have the kind of speed, take off and form required to stiff pole that grip height, then you should easily be able to bend a correctly sized pole.


Return to “Pole Vault - Beginning Technique”

Who is online

Users browsing this forum: No registered users and 62 guests